Non-Asbestos > Gland Packings
Gland Packings
Style 1 Drylon
Description: A SUPER FLUOROCARBON INTERBRAIDED PACKING without additives of any kind. This packing is virtually a premium packing because of its very low co-efficient of friction and it ensures immediate response to pressure changes. This packing is developed for pumps and valves handling highly corrosive liquids, where soft resilient packings are desired.
Services: This packing is strongly recommended for Oxygen service, centrifugal shafts, mixers and agitators. A special packing for ammonia charge pumps, carbomate recycle pumps etc. involving high pressure application, acids and alkalies of any concentration. Not recommended to use on molten alkail metals.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 290oC |
Pressure | upto 400 Bar |
PH | 0 -14 |
Style 2 Neoflon
Description: A special tough 100% Pure PTFE Packing Impregnated with special ultra chemical inert suspensoid. The packing is diagonally braided. Our special impregnation process increases compressibility and recovery factors. This packing responds readily to pressure changes and forms a long lasting gland seal having very low coefficient of friction.
Services: A good packing for control valves even under high pressure conditions, reciprocating rods, pumps handling corrosive gases, solvents, acids, hydrocarbons, ammonia, food -stuffs and pharmaceutical industries.
Not recommended to use on molten alkali metals such as Sodium, Potassium and gaseous fluorine as these can attack at high temperatures and pressures.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 290oC |
Pressure | upto 520 Bar |
PH | 0 -14 |
Style 3 Ultraflon
Description: A special all Chemical Packing manufactured from Pure PTFE Fibres having DUPLEX BRAID construction to increase dimensional stability treated with inert high temperature resisting lubricant to resist migration and to display compressibility and recovery characteristics. The packing is safe, more flexible, and non-toxic. Fluids can be sealed with a minimum of gland pressure, consequently there is less friction as well as heat build up. It is an inert, virtually indestructible packing, having a lower co-efficient of friction with good compressive strength.
Services: A good packing to seal against concentrated acids, alkali solutions, oils, corrosive gases, food -stuff and pharmaceutical industries. This packing is not recommended to use on molten metals and gaseous fluorine.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 290oC |
Pressure | upto 350 Bar |
PH | 0 -14 |
Style 23 Flurocarb
Description: A Duplex Plaited Packing of exceptionally strong fluoropolymer blended with super grade graphite particles to enhance lubricity and heat dissipation and low thermal expansion.
Services: This packing is particularly suitable for high shaft speeds. The packing is recommended for valve stems centrifugal and reciprocating applications, slurry pumps. A fairly good packing for high pressure applications against caustics, acids, chemicals, liquors, pulp with the exception of strong oxidising agents.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -250oC to 300oC |
Pressure | upto 350 Bar |
PH | 0 -14 |
Style 25 Insitlon
Description: AN IDEAL PACKING FOR SCORED
SHAFT / SLEEVES
The ingredients are formulated and blended to provide a packing with superior anti-friction and non-scoring characteristics. The packing though not braided yet stable, strong, mouldable, smooth, flexible, and malleable. All the ingredients of the packing is a lubricant. The packing is incorporated with heat transfer properties.
Application: This packing is a supplement to worn out braided packing or to use as a combination with braided packing.
This packing because of its mouldable properties adopt to any shape or configuration in the stuffing box and compensate for wear by moulding itself to the required shape and can salvage the worn out conventional packing.
This packing eliminates the need for maintaining inventory of various sizes since it can caulk into any size of stuffing box even with excessive tolerances due to its exceptional malleability.
Services: The packing is recommended for oil, water, solvents, steam paper mill stock, acids and alkalies, abrasive, centrifugal or reciprocating pumps, mixers, agitators, valves, expansion joints with the exception of strong oxidizing agents, fluorine and fuming nitric acid.
For higher pressures if greater clearances are encountered back up rings of braided packings are recommended.
Recommended
Temperature | -200oC to 300oC |
Pressure | upto 200 Bar |
PH | 0 -14 |
Style 36 Graflon
Description: Universal super performance packing DUPLEX Plaited form of sophisticated special Fluoropolymer fibre intimately bonded with graphite which will improve thermal conductivity and lubricity while retaining the quality of extremely low friction. The presence of graphite acts as a heat generated at the pump shaft or value spindle. Thus the resiliency and compressibility of the packing last long. This packing does not harden and runs cool. It has a low co-efficient of thermal expansion.
This packing is recommended for oils and solvents, caustics, acids, dyes, chemicals, white and black liquor, wood pulp, detergent with the exception of strong oxidising agents, aqua regia, fluorine and fuming nitric acid.
Services: The packing is recommended for oils and solvents, caustics, acids, dyes, chemicals, white and black liquor, wood pulp, detergent with the exception of strong oxidising agents, aqua regia, fluorine and fuming nitric acid.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -240oC to 300oC |
Pressure | upto 350 Bar |
PH | 0 -14 |
Style 38 Carbosuper
Description: An Interbraid multiservice carbon filament packing for pumps and valves. It is a special packing with low friction characteristics adapted easily and quickly into the equipment and requires only occasional gland adjustments.
Services: Its heat sinking ability makes this packing an ideal seal in high speed rotary equipment, sealing against boiler feed water, steam, oils, aromatic aliphatic solvents, acids and alkalies except fluorine, oleum, fuming nitric acid and aqua regia.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 600oC |
Pressure | upto 350 Bar |
PH | 1 - 14 |
Style 40 Carbonel
Description: Carbonel is a specially developed packing made from Carbon yarn reinforced with special quality inconel wire. Its inherent chemical stability, high thermal conductivity and low friction co-efficient makes it ideally suited to sealing applications involving high temperatures and pressures.
Services: The highly carbonised structure with metal reinforcement makes this packing suitable for high performance of superheated high temperature & pressure steam valves including main stop valves, control valves, etc.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) For exceptional performance, die formed packing is recommended.
Recommended
Temperature | -200oC to 950oC |
Pressure | upto 700 Bar |
PH | 1 - 12 |
Style 66 Grafosuper
Description: A premium service high temperature 100% Graphite Packing manufactured by the interbraid method. It is treated with special blocking agent to prevent seepage through the packing. It eliminates most of the shaft wear because graphite fibres are comparatively frictionless and immune to chemical hardening. The inherent lubricating value, low-coefficient of expansion, high heat conductivity, high temperature resistance are the characteristics of the packing resulting in extended packing life, lower maintenance cost, less down-time, lower leakage rates, and less shaft wear.
Services: A premium service packing for acids, alkalies, oils, solvents, steam, fuel oil, hot tar pumps, refinery services, mixers and agitators. Not recommended to use against oxygen, fuming nitric acid and other strong oxidising agents.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | 650oC (Non oxidising atmosphere upto 3000°C) |
Pressure | upto 350 Bar |
PH | 0 - 14 |
Style 78 Flexograph
Description: SPITMAAN INTRODUCES A new non-asbestos non metallic versatile braided packing made from "Expanded Pure Flexible Graphite Material". This packing is specially developed to meet with various sealing problems. It is an ideal sealing material to solve the problems of corrosion having excellent thermal conductivity. It has good impermeability for gases & liquids. Best suited for valves handling high pressure super heated steam application , pumps, compressors most organic and inorganic acids except a few strong oxidizing medium such as aqua regia, nitric acid, oleum and some halogen in special concentration. It is recommended for use against acid,alkali, salt solution, organic solvents, oil, hydrocarbons. This expanded graphite packing is one of the most flexible, resilient, soft, light in weight and it has plasticity and settles in gland to form an efficient seal. It has high sealing efficiency at high and low temperature.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
This packing is also recommended to use as an anti-extrusion ring along with GRAFSEAL especially when the pressure is high. Also can be supplied reinforced with inconel wire, in SPITMANN STYLE 80
Properties
Density | 1.3 - 1.6 gms/cm3 |
Carbon Content | 98% to 99.9% , Also recommended for Atomic energy, Space application. |
Temperature | -250oC to +800oC (Steam) The packing is Non-corrosive, exceptionally low chloride content, self lubricating , very low co-efficient of friction and Non- abrasive. |
Pressure | upto 450 Bar |
PH | 0 - 14 |
Style 80
Description: Introducing a flexible and high strength braided Packing made out of an innovative expanded pure Graphite with inconel wire reinforcement. It contains no oil or binders. The purity of graphite is above 99.5%.
This packing is incorporated with sacrificial metal Corrosion inhibitor to prevent galvanic corrosion of the spindle/shaft. The packing is very resilient and responds to minimum gland pressure. This packing is having excellent resistance to thermal shock and high thermal conductivity which extends the serviceability of packing significantly.
The packing is self lubricating having low co-efficient of friction, non abrasive hence rules out shaft scoring. it is a unique and universal sealing material.
A special grade of this packing is also available for Nuclear Application.
Services: It can be used to seal hot water, super heated high temperature and pressure steam, heat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, fuel oil, cryogenic liquids, except fewer strong oxidizers such as fuming nitric acid, oleum etc.
Sizes:
1) Sizes 3 to 5mm in Coils of 10 meters.
2) Sizes 6mm to 11mm in Coils of 1 kg/2.5 kgs.
3) Sizes 12mm/1 2.5mm and above in Standard Coils of 2.5 kgs/5kgs.
Properties
Temperature | -240oC to 700oC (steam) +3300oC (Non-oxidizing media) |
Pressure | Upto 480 Bar |
PH | 0 - 14 |
Style 127 Novlon
Description: A new generation thermoset environment friendly DUPLEX BRAIDED packing. It not cause severe shaft scoring like many other synthetic fiber packings. This is non-contaminating, non-hazardous packing. Due to low co-efficient of friction heat generated is less, resulting in very less wear on shafts/sleeves. The packing is immunized with inert and break-in sacrificial lubricants prolongs packing life. It lacks the stiffness of conventional synthetic packing and retains to a great extent its tensile strength in running temperature. The packing is free from electrolytic pitting, elongation and extrusion problems. The packing is very kind to shaft/sleeves and will not leach colours. It is mouldable and conforms to stuffing box configurations a breakthrough in the selection of packings for most difficult application including abrasive conditions.
Technical Data: Resistant to most process chemicals & solvents. Unaffected by non-oxydizing acids, organic solvents and liquors. Used in rotary and reciprocating pumps, valves.
Not to be used in concentrated or hot sulphuric or Nitric acids.
Highly in demand with Sugar, Food, Pulp and Paper, Chemical Plants, Petroleum Products Pharmaceutical Industries and Power Plants.
Sizes:
1) Sizes 6mm Square in Coils of 1 kg / 2.5 kgs.
2) Sizes 8mm to 25mm Square in coils of 2.5kg / 5kg.
3) Sizes above 25mm Square in 10kg / 25kg. Coils.
4) Tailormade formed rings are also available on request.
Recommended
Temperature | Upto 280oC |
Pressure | Upto 100 Bar |
PH | 1 - 13 |
Shafted Speed | Upto 2000 ft./Min |
Style 134 Acrylon
Description: A special Duplex Braided Synthetic Fiber Packing to replace asbestos packings in a variety of applications. The packing is impregnated with chemically inert lubricants by a special process and is having good anti-friction properties.
Service: This packing is specially designed to handle wide range of services including chemicals, oils, steam, water, air, mild acids etc. It can be safely used in centrifugal and reciprocating pumps handling demineralised water, slides, valves, food and pharmaceutical industries, compressors, cooling water, mild acids and alkalies, dyes and gases.
Sizes:
1) Sizes 3mm to 5mm in spools of 10mtrs.
2) Sizes 6mm to 10mm in coils of kg.
3) Sizes 12.5mm and above in coils of 2.5 kgs/5kgs.
Recommended
Temperature | 230oC |
Pressure | 50 Bar |
PH | 2 - 12 |
Shafted Speed | 10 M/s. |
Style 135 Acrylon
Description: The packing is also supplied impregnated throughout with special lubricant and graphite. Excellent packing for use in low and medium pressure pumps and available.
Sizes:
1) Sizes 3mm to 5mm in spools of 10mtrs.
2) Sizes 6mm to 10mm in coils of kg.
3) Sizes 12.5mm and above in coils of 2.5 kgs/5kgs.
Recommended
Temperature | 200oC |
Pressure | 50 Bar |
PH | 4 - 10 |
Shafted Speed | 10 M/s. |
Style 160 Glass Fibre
Description: Dry Packing braided from special glass fibre having excellent thermal insulation property. Packing is flexible dimensionally stable having high tensile strength. Unaffected by chemicals or solvents for Industrial and marine application.
Service: An ideal packing for Caulking, thermal insulation, boiler seating, furance joints, Oven and Autoclave doors, resists oil, mild acids & alkalies for use in Thermal Power Stations, Heat insulation of Exhausts in Ship and Ship building industries, Flue gas ducts application and other general insulation requirements in industries.
Recommended
Temperature | 600oC |
PH | 3 - 10 |
Style 161 (I) Glass Fibre
Description: It is a non-asbestos synthetic fibre plaited packing designed to handle high pressures and temperatures. It remains flexible, compressible even at high temperature and pressure conditions. This packing is developed from a special grade of Glass fibre with an inconel wire insert, impregnated with graphite. This packing is designed to retard pitting of chrome steel stems due to electrolytic action. This packing is dimensionally stable having high tensile strength.
Service: An ideal packing for high pressure valves, expansion joints, water, air, steam, oil, liquid petroleum, chemicals, Solvents an ideal packing for use in Nuclear Power Plants, Thermal Power Stations, Steel Plants, Petrochemicals, Refineries.
Recommended
Temperature | 650oC |
Pressure | 3 - 10 |
PH | 300 Bar |
Style 162 Glass Fibre
Description: Inter-braided packing of Non-asbestos manufactured from a special high tensile glass yarn every strand of which is lubricated with mineral oil and graphite.
Service: An ideal Packing for pumps, valves, demineralised water, acids and alkalies of medium concentration suitable for use in Thermal Power Plants, Fertilizers, Refineries, Hydraulic installations, Petrochemical Industries.
Recommended
Temperature | 450oC |
Pressure | 200 Bar |
PH | 3 - 13 |
Style 164 Glass Fibre
Description: DUPLEX Braided from selected grade of continuous textured glass yarn impregnated with chemically inert PTFE suspensoid and break-in-lubricant.
Service: The packing is recommended for use against a wide range of chemicals, oils, solvents, acids & alkalies, water. Not recommended for fluorine, molten alkali metals, phosphoric or floric acid.
Recommended
Temperature | 300oC |
Pressure | 250 Bar |
PH | 3 - 12 |
Style 165 Ceramic
Description: A Non-Asbestos Braided Packing manufactured from a special grade of Alumina Silica Ceramic Fibre having superior insulating property suitable for a wide variety of industrial applications. This has excellent resistance to thermal shock flame corrosion greater compression resistance. The packing has very good resiliency even at high temperature, chemically stable, low thermal conductivity are just some of the properties of this material.
Service: This is a very efficient packing for insulating applications in coke ovens, door joints of steel plants, refractory backup to reduce heat loss and prolongs refractory life, prevents fume emission on exhaust collection system, blast furance application, pertoleum and petrochemical industries flue gas duct applications of thermal power stations, ship and ship building industries, expansion joints, a fire retardant in nuclear power plant and chemical industries manufactured in round or square section.
Sizes:
1) 6 mm to 10 mm in coils of 2.5kgs.
2) 12 mm to 25 mm in coils of 5kgs.
3) Above 25 mm in coils of 10kgs.
Not recommended for phospheric acid and hot concentrated alkalies.
Recommended
Temperature | 1250oC |
Style 166 Kombigraf
Description: A unique Duplex braided PTFE and pure graphite fibre combined packing. A first class multi service packing in which wear resistance and dispersal of heat are intimately combined.
Service: The packing is widely used in the chemical, food, pharmaceutical and petrochemical industries. This flexible combination packing is mechanically strong and has good heat conductivity and resistance to chemicals.
Sizes:
1) Size 6 mm and above is supplied in Boxes/Kgs.
2) Also can be supplied in accurate cut rings.
Recommended
Temperature | upto 300oC |
Pressure | upto 300 Bar |
PH | 0 - 14 |
Style 168 Ceramic
Description: This packing manufactured from a unique grade of ceramic fibre undergoes a special process to obtain high purity composition required for superior thermal insulation properties. The packing is reinforced with Inconel wire which increases mechanical strength and resistance to compression.
Service: Packings are resistant to oil, greases, steam and most of the chemicals. It is not suited to certain strong alkalies and solutions. It resists molten metal.
Sizes:
1) 6 mm to 10 mm in coils of 2.5kgs.
2) 12 mm to 25 mm in coils of 5kgs.
3) Above 25 mm in coils of 10kgs.
Recommended
Temperature | 1200oC |
Style 169 Ramieflex
Description: Present day gland packing manufacturing activities are concentrated on synthetic yarn sealing material. there are other natural fibers still play a versatile role with their unique properties. Prominent among them is Ramie an extremely strong top quality fiber of plant kingdom. To manufacture gland packings these fibers are uniquely impreganated with PTFE dispersion by a proprietary process and further treated with inert lubricant.
Service: The packing is Duplex Braided which maintains uniform density and compressibility. This natural fiber has very great strength than other vegetable fibers. The rot resistance is excellent. This pacing is having high resilience, flexibility, resistance to extrusion and abrasion, low wear character. Heat build up is negligible due to low friction properties.
Application: An ideal packing for high pressure reciprocating pump, Brine circulation, Cellulose slury, Crystalline & abrasive media even containing suspended solids, Chemical & Pharmaceutical, Petrochemicals, Hydroelectric, Paper industries, Sugar Mills, Stren Gland Oils, salt Water, Centrifugal & reciprocating pumps, Valves, Agitators etc.
Sizes:
1) Sizes 3mm to 5m in pool of 10mtrs.
2) Sizes 6mm in coils of 1kg / 2.5kgs.
3) DUPLEX BRAIDING FROM 6mm & ABOVE:
- Sizes 8mm and above Upto 25mm in coils of 5kgs.
- Rest of sizes on request.
4) Also can be supplied in performed molded rings.
Recommended
Temperature | -30oC to 160oC |
Reciprocating Pressure | Upto 480 Bar |
T Rotary Pressure | 50 Bar |
PH | 0 -14 |
Max. Speed | 18 M/s. |
Style 170 Paramid
Description: This packing present a new concept where soft packing are required for rotary pumps & valves. The packing is made from special grade of paramid fibers. The fiber does not suffer from thermal expansion. This packing is impregnated with inert polymers and high temperature resisting lubricating has a low co-efficient of friction and considerably disperses the heat generated by the peripheral speed.
Service: The packing is DUPLEX braided and being flexible and non-standing is most suited for wide range of chemicals, hydrocarbons, paper mills, steam, solvents, abrasive fluids, acids, alkali and oils (except for molten alkalies, metal and fluorine) ash handling systems of power plants.
Sizes:
1) Sizes 3mm to 5mm in spool of 10 mtrs.
2) Above 5mm is supplied on weight basis.
3) Packing are also available in formed rings on request.
Recommended
Temperature | Upto 280oC |
Pressure | Upto 200 Bar |
PH Range | 2 -13 |
Shaft Speed | 20 M/S. |
Style 172 Duralon
Description: This is a super combination Cross Braided Packing specially designed with lubricated pure PTFE on the faces and special yellow synthetic fibre filaments on the corners. Due to its multifibre dense and homogeneous construction the packing is most suited to all fluids including corrosive chemicals, even under extremely high pressure conditions. The packing has exceptionally good dimensional stability, creep resistance and non-toxic. The packing will not provide extraneous stresses on plungers which damage both packing and plunger under high pressure conditions.
Service: Recommended for use in dairies, foodstuff, beverages, pharmaceutical industries and refineries. A good packing for high pressure pump handling carbomate and ammonia solutions in the fertilizer industry, miscellaneous chemicals in the petrochemical industry, feed water pumps, etc.
Sizes:
1) Sizes 6 mm and above is supplied in Boxes/Kgs.
2) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 280oC |
Pressure | Upto 500 Bar |
PH | 2 -12 |
Style 174 Duragold
Description: ANTI ABRASIVE PACKING Duplex Plaited Non-Asbestos Synthetic Fibre product which is as strong as steel, as smooth as silk, most flexible and treated with high temperature resisting lubricants, under controlled conditions. Well suited for pumping granular and viscous fluids even under high pressure conditions.
This packing has a high degree of resiliency and consistency of volume and hence avoids frequent gland adjustments. Low thermal expansion characteristics under actual operating conditions reduce mechanical pressure against shaft sleeves to minimise abrasion effect.
Service: This packing is recommended for solvents, mild acids and alkalies, fuel oil, digester pumps, food, pharmaceuticals, petro-chemicals, pulp and paper industries. A good packing for high pressure dozing pump and high pressure water injection system. The rings made out of this packing are recommended to use as 'BACK -UP' rings (anti-extrusion rings) with other types of soft packings especially where high pressure is involved.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Size above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 300oC |
Pressure | upto 280 Bar |
PH | 3 -12 |
Style 176 Kombiflon
Description: A special quality combination Packing incorporated with PTFE Graphite Fibres with additional yellow synthetic fibre reinforcement in the core and corners to give sliding surface and heat dissipation property.
Service: It is most suited to centrifugal and reciprocating pumps even at high pressure for abrasive slurries. It can safely be used in hot water, sewage water, oils, gases, liquid ammonia and carbomate solution under high pressure conditions, acids, alkalies, organic and inorganic solvents.
Sizes:
1) Sizes 6 mm and above is supplied in Boxes/Kgs.
2) Also can be supplied in accurate cut rings.
Recommended
Temperature | -200oC to 300oC |
Pressure | upto 500 Bar |
PH | 3 - 12 |
Style 180
Description: Expanded Pure graphite braided gland packing having inconel wire mesh jacket over each yarn alongwith multiple reinforcement of inconel wire inside each yarn.
Service: An ideal sealing material having excellent thermal conductivity, impermeability for gases and liquids. Best suited for valves handling high pressure super heated steam, pumps, compressors, salt solution, solvents, oil, hydrocarbons, petroleum distillates, acids and alkali solutions. Very flexible, resilient compression packing for critical application.
Sizes:
1) Sizes 3 to 5mm in Coils of 10 meters.
2) Sizes 6mm to 11mm in Coils of 1 kg/2.5 kgs.
3) Sizes 12mm/12.5mm and above in Standard Coils of 2.5 kgs/5kgs.
Recommended
Temperature | -200oC to 780oC |
Pressure | Upto 500 Bar |
PH | 0 -14 |
Style 185 Shipping and Chemical Industries
Tank Cover Packing: A very special packing is developed for modern sea going Vessels & Tankers which carry Petroleum Products or hazardous chemicals where a proper SEAL is required for TANK COVERS to stop any leakage of liquid, gases or any hazardous chemicals. This packing is also recommended to use in chemical, Petrochemical, Refineries or any other industry where hazardous chemicals are to be stored or transported from one place to another. This packing is designed with a hollow tubing of Synthetic elastomer and covered with Synthetic yarn. The outer layer is braided with treated P.T.F.E. to withstand most of the Chemicals and Petroleum products.
TANK COVER SEALS are manufactured in square form from 12 mm onwards and can be supplied in continuous length to suit customers requirement.
Style 374 Hydroflon
Description: A multiservice Hydraulic Packing DUPLEX Braided manufactured from pre-impregnated soft vegetable fibre yarn. During the process it is further treated with special additives having lowest co-efficient of friction along with break-in lubricants. This special additive avoids discolouration of the product pumped.
Service: This packing is best suited to seal the glands of pumps, valves handling condensate, demineralised water, cold and hot water application in thermal power plants and hydraulic installations.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Sizes above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | 150oC |
Pressure | Upto 80 Bar |
PH | 4 -10 |
Style 376 Hydraulic Shipping
Description: A specially developed soft natural fibre yarn packing non-graphited impregnated with top quality lubricants and specially processed to give high cross-sectional density and structural strength.
Service: Recommended for high speed centrifugal demineralised water pumps, compressors and refrigerations, cooling water and condensate pump.
Sizes:
1) Sizes 3 mm to 10 mm is supplied in spools of 6 mtrs.
2) 11 mm and 12.5 mm in coils of 3 mtrs.
3) above 12.5 mm in Boxes/Kgs.
4) Also can be supplied in accurate cut rings.
Recommended
Temperature | 130oC |
Pressure | Upto 80 Bar |
PH | 6 - 8 |
Style 2222 Aqua Special
Description: This packing is specially constructed from fine quality long tough abrasion resistant vegetable fibre yarn. During the process of manufacture, each strand is impregnated with non-graphite lubricant to enhance the antifriction property.
Service: The special design of solid plait having medium density and good flexibility enables to withstand high pressure and temperature for all hydraulic uses in pumps, water wheel, shafts, sea water, river water and STERN GLANDS.
Sizes:
1) Sizes 3 mm to 10 mm is supplied in spools of 6 mtrs.
2) 11 mm and 12.5 mm in coils of 3 mtrs.
3) above 12.5 mm in Boxes/Kgs.
4) Also can be supplied in accurate cut rings.
Recommended
Temperature | 130oC |
Pressure | Upto 200 Bar |
PH | 6 - 8 |
Style 2224 Stern-Flon Marine Packing
Description: A premium STERN TUBE DUPLEX Braided packing manufactured from tough vegetable fibre for heavy duty Hydraulic and Marine application including rudder posts. This packing is incorporated with special lubricants to promote non-flowing lubricity, compressibility, flexibility and to minimise shaft wear. The volume loss, friction and heat build up is kept to the minimum. There will be no wash out of lubricants as experienced with conventional packings. The special lubricant forms a protective shield around the basic fibre preventing fluid penetration and fibre break down.
Service: This packing is recommended for ships and ship-building industry as it reduces maintanance cost and is a money saver. It is best used against sea-water, oils, weak alkali solutions, STERN GLANDS, in food-stuffs, pharmaceutical industries and Paper Mills for reciprocating and rotary applications in pumps and valves.
Sizes:
1) Sizes 3 mm to 5 mm is supplied in spools of 10 mtrs.
2) Sizes above 5 mm is supplied in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | 150oC |
Pressure | Upto 240 Bar |
PH | 6 - 10 |
Style 3116 hydrograf
Description: A fine soft natural fibre braided packing impregnated with lubricants and graphite. The packing presents a smooth surface that will not score shaft or sleeves because the soft fibre constantly absorbs the liquid being pumped and maintains a soft and pliable running face on the shaft.
Service: Recommended for use on reciprocating and rotary pumps, valve spindles, refrigeration machinery and compressors, cooling water and condensate services.
Sizes:
1) Sizes 3 mm to 10 mm is supplied in spool of 6 mtrs.
2) 11 mm and 12.5 mm in coils of 3 mtrs. above 12.5 mm in Boxes/Kgs.
3) Also can be supplied in accurate cut rings.
Recommended
Temperature | 130oC |
Pressure | Upto 80 Bar |
PH | 6 - 8 |